DT466 Fuel Filter Supply Line Clip / Retainer (Replacement for Factory Clip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct replacement snap-on clip for DT466 fuel filter supply line. Prevents hose from pulling out and causing leaks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a direct replacement clip for the DT466 engine fuel supply line that connects into the engine-mounted fuel filter housing.
The factory plastic clips are notorious for breaking, which usually forces you to replace the entire expensive fuel line. This printed clip snaps securely over both the filter housing inlet and the fuel line, holding it tight and correctly in place.
It stops the fuel hose from coming out and causing leaks. A cheap and effective fix that saves time and money.
Features:
Secure snap-fit design — holds the supply line firmly in place
Matches the factory geometry and function
Simple one-piece print
Great for fleet vehicles, mechanics, and DT466 owners
Printing Recommendations:
Layer height: 0.2 mm
Infill: 15% (standard gyroid or cubic works well)
Filament: PCTG recommended for strength and fuel resistance (PETG also works if PCTG is unavailable)
Supports: Required (build plate supports only)
Z top distance: 0.31 mm
Orientation: Print as uploaded
Installation:
Print the clip
Clean up any support material
Snap the clip over the fuel filter housing inlet and the supply line until it clicks securely into place
Notes:
Designed specifically for the International DT466 engine fuel filter supply line
Test fitment on your engine before final install