Bass Shell Casing Washing Rack for Ultrasonic Bath
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack to hold your brass while washing in Ultrasonic Bath (6L)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a washing rack for brass shell casings. It holds them vertically and off the bottom while using an ultrasonic bath. I designed this to fit in my 6-liter Ultrasonic bath. It keeps the shells from rattling against each other, the bottom, while reducing the noise created from the shells or the metal basket. It also eliminates air bubbles that get trapped and prevent cleaning.
I recommend using PCTG or PETG, if not ABS. I used PCTG, and it worked great. Survived the 60F bath, as well as the citric acid and soapy water. It is designed to fit .223/6.5 Creedmore/.30-06, with the post getting progressively smaller for each caliber. I have not tested for .223, but designed it to fit.
I've included a STEP file as well, should anyone wish to make changes.
Please let me know your thoughts and if you have any suggestions for improvement.