Creality Spool arm to Voron Frame adapter - Troodon 2.0 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you like your Creality spool holder arms and want to reuse them on your Voron printer ...
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple spool holder adapter for old Creality spool holder (the one with the twist bayonet) to mount on a Troodon 2.0 Pro or a Voron 20mm vertical frame extrusion. Mounts with standard M5 hex head to the T-Nut that is captive inside of the vertical frame member. Fits the cabinet slot on a Troodon 2.0 Pro perfectly.
Print with removable snug supports - they break out easy enough. Be sure to remove all of the supports so the screw detent is available. Print with gyroid infill and 4 perimeters so it won't break under strain.
After printing, put a M5 10mm screw through the hole in the middle, insert a T nut into your 20mm extrusion at the right position, and screw the adapter to the printer frame. If you need a right angle adapter to mount on the side instead of the back, I have another model that lets you do that. Then simply bayonet your Ender spool holder into the adapter once it is on the frame tightly. Twist and it should lock into place (jam fitting).