Heart Necklaces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Simple parted hearts I made for a Friend
Updated, reduced hole diameter from 5mm to 4.5mm because the loop broke off when milled from wax. And added separated file for each half.
The photo of the green hearts is them milled from wax just after taking them out of the blank. You can see the loop is broken which is why i reduced the hole diameter.
The photo of the metall hearts is after casting and removing the oxide from them, before I welded a new loop on them.
Added a new picture, this time milled from Zirconium dioxide. I need to still optimize the design of the loops for millig from fragile materials as they broke of again.
Instructions
Just print it or open in Tinkercad if you want to add letters.
Category: 3D Printing