LED bridge lamp - Spine Bone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very easy-to-print LED strip bridge lamp made to look like a spine and with customizable size.
- Ocena
- 4,5 / 5
- Polubienia
- 114
- Pobrania
- 215
- Wydruki
- 2
- Wyświetlenia
- 2756
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Easy to print, highly customizable, modular spine bone LED bridge lamp.
https://www.youtube.com/watch?v=dR8N_hhwZwA
https://www.youtube.com/watch?v=jW-M4EGwua4
- All elements (except the led strip) are 3D printed. (0% infill, no support, no brims, no rafts)
- The assembly is very easy and doesn't require any additional tools
- The led strip can be up to 12mm wide.
- LED stripe and shade have dedicated channels, so no gluing is needed
- The weight elements can be filled with concrete (although anything else will also work)
- Print the LED shade with a transparent PLA
Required LED stripe:
- Around 2m in length
- Up to 12mm wide
e.g. SMD 5050 (not coated) led stripe
Visit my blog for more cool stuff: https://www.thinker-talk.com/
Needed elements:
48x joint elements
1x LED stripe shade
2x foot
6x weight elements
6x 0° bone elements (1)
4x 15° bone elements (2)
12x 10° bone elements (2)
1x top bone element
(1) count depends on the wanted height
(2) any combination of 10° and 15° is possible. The sum must be 180°.