Compact holder for toolant brand allen sockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact holder for toolant brand allen sockets
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original case is made of foam, which is fine for being in a tool box, however i need to keep these in my tool bag for on the go repairs. The set is available on amazon, and comes with a lot more then shown here, but i needed to save space so i only included the most common 11 sizes plus 17mm.
You can print 2 of them and use one for the base and the second for a cover, as shown in the photos.
There are magnet cut outs for 12x2mm magnets on the top surface for retention of the cover, and you can glue 2 mm tall magnets in the bottom for extra retention.
The photos of the print itself aren't great because my top layer settings were off a little bit, but it is embossed with:5/32, 3/16, 7/32, ¼, 5/16, 3/8, 4, 5, 6, 8, 10, and 17.(standard sizes and metric sizes)
Printed in PETg, with 5 walls and 10% infill, its pretty stout.
Feel free to ask any questions.