1 / 2
Hueforge of Avatar AAng and Appa — zdjęcie 1
1 / 2

Hueforge of Avatar AAng and Appa

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hueforge of Avatar AAng and Appa

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 112.54x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.12mm

#0163a6 PLA Panchroma Matte Sapphire Blue Transmission Distance: 0.1
#2e4462 PLA Panchroma Matte Army Blue Transmission Distance: 0.1
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#565d65 PLA+ Sunlu Grey Transmission Distance: 2
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
#101820 PLA Inslogic Matte Black Transmission Distance: 0.1
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
#ffb73e PLA Snapmaker Yellow Transmission Distance: 5.3
#ebb791 PLA Geeetech Matte Skin Transmission Distance: 3.4
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 12 unique filaments

Swap Instructions:

Start with Matte Sapphire Blue
At layer #13 (0.64mm) swap to Army Blue
At layer #15 (0.72mm) swap to Blue Gray
At layer #17 (0.8mm) swap to Grey
At layer #21 (0.96mm) swap to Chocolate
At layer #25 (1.12mm) swap to Latte Brown
At layer #26 (1.16mm) swap to Matte Black
At layer #29 (1.28mm) swap to Orange
At layer #36 (1.56mm) swap to Yellow
At layer #39 (1.68mm) swap to Skin
At layer #44 (1.88mm) swap to Ash Gray
At layer #47 (2mm) swap to Jade White for the rest.

Tagi