Hollowtech II Safety Crank Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Safety insert for Shimano Hollowtech 2 crankset
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Safety insert for Shimano Hollowtech 2 crankset. The piece provides a seat for a 1.2mm steel nail, cut to a length of 7.5mm, which is then embedded in the plastic with a soldering iron. Then, using a piece of filament, melt some plastic over the nail with the soldering iron to seal it to the piece. Be careful, remember to heat well to weld plastic to plastic, keeping the thickness thin so as not to create obstacles when tightening the crankset.
printend with ASA
100% infill
it take 3 minutes of printing
Replacement-compatible part for personal repair use.
Not an official Shimano product. Shimano is a trademark of its respective owner.
This model is provided for non-commercial personal use only.