9mm Luger Modular Bullet Holder - Stackable System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully modular and stackable storage system designed specifically for 9mm Luger or build your own custom-size.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
9mm Luger Modular Bullet Holder - Stackable System
A fully modular and stackable storage system designed specifically for 9mm Luger ammunition. This system allows you to either print a high-capacity 165-cell box or build your own custom-sized tray directly in your slicer using individual component files.
Key Features
Fully Modular: Build any configuration (e.g., 5×10, 10×10) by snapping individual cells together in your slicer.
Stackable Design: Integrated corner pillars allow multiple holders to be securely stacked on top of each other.
Optimized Geometry: Each cell features a 10 mm internal diameter and a 20 mm depth.
Ergonomic Base: The bottom of each cell has a R4 radius for stability and easy cleaning.
Component Files Included
Complete Box: Ready-to-print 165-cell version (182.8×138 mm).
Middle Cell: The core building block for the interior of your grid.
Side & Corner Cells: Specific outer pieces to create a clean, finished edge.
Stacking Pillars: Corner attachments that enable the vertical stacking function.
Technical Specifications
Recommended Material: PETG or PLA.
Print Settings: 0.2mm layer height, no supports required.