Modular Desk Organizer | Clamp + Stand + 4 Cassettes | Pen Holder, LED Lamp, Trash Bin, Magnetic Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another practical artifact from the Artifact Forge workshop
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Tray. The Cassette You Didn't Know You Needed.
You're working on a repair. You unscrew a tiny M3 bolt. It rolls off the desk. Gone.
This modular system was built to solve exactly that. At its core: a magnetic hardware tray with embedded neodymium magnets — bolts, nuts, and washers stay put even when you bump the table. A snap-on lid keeps everything secure when you're done.
But one base shouldn't do just one job.
1 Base → 4 Cassettes. The C-clamp base uses a slide-lock interface — swap cassettes in seconds without tools:
✏ Pen Organizer — 7 compartments, always within reach
💡 LED Lamp — COB strip, USB-C powered, adjustable angle
🗑 Mini Trash Bin — open-top cylinder for clippings and scrap
🧲 Magnetic Tray — neodymium magnets + lid, hardware stays visible and secure
The base also works with a desk stand (tripod-style) when you don't need the clamp.
Designed to be extended. The cassette interface is open. All models are parametric — designed in Fusion 360, ready to scale or remix. Full CAD walkthroughs on YouTube.
📦 Print Settings: 0.2 mm layer height, PLA or PETG, 25–35% infill. No supports needed.
Recommended Print Settings
0.2 mm layer height
0.4 mm nozzle
PLA or PETG
25–35% infill
📩 Contact: [email protected]
📥 Documentation, firmware, files — on the channel.
📺 YouTube: https://www.youtube.com/@artifact-forge
🔗 Telegram channels:
⚙ 3D modeling, CNC: https://t.me/bl_3d_mgmt
🔌 Projects, microcontrollers: https://t.me/bl_projects