The 120° Executive Putting Cup: Ramped Office Golf Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An indoor office golf putting solution!
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 298
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Searching for a way to play golf in the office without breaking a mug, or using a "hole" that's just... not cool? I present to you: the answer.
My buddy recently brought a putter and golf ball into the apartment - he will not put it down. For the longest time, he would just putt it around the living room. However, I don't want scuffed baseboards (or ankle injuries), so I designed a target for his putting.
This design is great for setting in corners. It stands out, so you can't miss it, and nor can the other people in your environment. It has an intuitive design: using the flag as a marker and an attention getter, while leaving ample room for a golf ball to find its way inside. The combination of the 120-degree aperture and the 13-degree ramp allows for easy access to the hole while mimicking the kind of precision you would need to putt a birdie on the actual green.
Not one for goofy looking flags? Think my flag will get in your way? Never fear, I've included a rendition of the putting cup that doesn't have a flag slot - you can putt unhindered all day long.
Here's a couple of notes from my experience printing this golfing assembly:
Firstly, I printed the cup/ramp part with a brim to aid adhesion. I used 4 layers for it, and with that setting, the print fits snuggly on a Prusa Mk. 4. The brim also helps the ramp transition to the surface you set it on, which in turn helps the ball access the ramp without any risk of bumping off of an edge. For this reason, I keep the brim on mine unless I need to remove it due to damage.
I print the flagpole standing vertically. Consider a brim for adhesion purposes.
The flag itself has been designed with a 90-degree notch in it. Slice the part so that the flag (and notch) both face up towards the top of the printing area. This mitigates need for supports, which at that point, should really only be added to the back end of the flag part, in contact with the print bed.
Please, let me know how this turns out for you! I'd love to see the function outside of my own environment. Have any questions or recommendations? Let me know! I'd be open to design additions, like numbered flags for an expanded course.
Happy golfing!