Gridfinity Storage Box Lid for 21mm Unit Sized Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design adapts the Gridfinity storage box to be compatible with 21mm unit-sized boxes.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 2
- Wyświetlenia
- 99
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I am a huge fan of Pred’s Gridfinity storage box system, as well as the 21mm unit-sized boxes. However, after printing several 21mm inner boxes, I realized the original lid wasn't compatible with them. To fix this, I designed custom lids that work perfectly with these boxes.
I used Pred’s Fusion 360 source file and STEP files exported from gridfinitygenerator.com as a base. I have personally tested and printed the 5x4 lid, and it works great. While I haven't had the chance to test the other sizes yet, please let me know in the comments if you try them out!
I’ve included Pred’s original print instructions below for reference:
Print Instructions I printed all parts in PETG using a 0.4mm nozzle and 2 wall loops; I strongly recommend using PETG for these. You can increase the wall thickness if you prefer, though it will use more material and slightly increase print time. The lid, in particular, can benefit from thicker walls.
Lid Settings
Recommended profile: 0.3mm DRAFT
Supports: I recommend adding supports near the hinge slot to help with the long bridging.
Bridging Angle: Change the bridging angle to 45 degrees (Print Settings → Infill → Advanced → Bridging Angle).
Orientation: Place it right-side up.