NR200 compact side SFX mount for mATX motherboards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount the SFX PSU on the side of the case next to an mATX motherboard, such as the Asrock B550M-HDV
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
The original mount holes for the PSU bracket are covered by the mATX motherboard. This bracket allows you to still install the PSU to the side of the case with a duct for getting cleaner airflow from the side vent (otherwise it tends to pull in warm GPU air).
It requires 6x heat set inserts voron size (M3x5x4mm, M3 thread, 5mm outer diameter, 4mm length) and 6 m3 screws and washers. The lenths of the screw holes to mount to the case aren't critical, but you do not want to use too long screws for attaching the duct as they will push on the back of the PSU.
Take case inseting the side heat sets as the plastic there is quite thin.
I like to push the heatsets in from the front of the mount and screw into it from the back for best strength, you may have to remove some plastic with a pick or pointed file that was pushed in the way of the hole by inserting the heatset.
The bottom bar provides extra support to the PSU, as the arms are printed in the weak layer direction. I have added an STL with it removed in-case (for some silly reason) you are not using the Corsair SF750.