Steam controller screw pegs v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made these pegs based on the model of the steam controller and should fit in the screw holes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
During some digging of steam controller info I found that the holes for the screws can become bothersome and in the hope to alleviate this problem I have made these pegs which should fit inside the holes to have a better feeling.
I have made a small hole for them to be able to be removed with a needle .
I did not manage to test the pegs as I don't have yet the steam controller.
I am still learning to 3d model but I hope to improve :D.
1 part - the lower center plug might need a bit of support (or not)
May you all enjoy your steam controller ^_^