Skadis to TV VESA Mount Adapter (300x300mm M8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to connect Skadis board to the VESA mount on TV/monitors
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
IKEA Skadis board holes are 40/20mm apart, while the VESA mount on TV or monitors are 100/200/300mm apart. hence I've created an mount adapter that will be able to mount the Skadis to VESA screw holes. my TV was VESA 300x300 (with M8 screws). Might work for 200/100 in theory, but might need to modify screw hole to smaller size.
Print with PETG preferably, as electronics generate heat, and in vertical orientation, add support to the bottom-side of the hook on printbed.
If hanging lightweight objects like ethernet switch, NUC, then I believe 1 pair should do the trick. For heavier objects, you will want to print 2 pairs. top pair and bottom pair will need to swap left/right in order to fit properly with Skadis hole patterns.
