VIRTU Placard with logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an UNOFFICIAL Ender 3 VIRTU placard and logo.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is an UNOFFICIAL VIRTU placard with logo. It was created during the alpha stage for my own use but folks kept telling me to make it available so here it is :)
The BASE is what the letters and logo are adhered to. I used cyanoacrylate in really tiny amounts using tweazers to align them before the glue sets (seconds). The BASE also has an angle section that I put a short UV LED strip in to make it really glow.
Feel free to use the BASE without the extrusion mount if you can find a place to put it. I wanted it in view during printing so I made the mount for adjustment purposes. Requires a single 3mm heatset insert for bolting the BASE to the MOUNT.
The filament is both Polymaker UV reactive Lime and Magenta.
The logo is not the official logo (there isn't one a the time of this publishing) so it's just something I ran with.
Virtu - https://www.printables.com/model/1476283-virtu-e3/related