Kitty Greeting Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,04 € – 0,05 € netto (bez VAT)
Dla pliku: Pnk_1_0.4n_0.2mm_PLA_MK4SMMU3_2m_0.344374g.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,05 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 1,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
3D Printed Card with Kitten Image
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Note a version without the text is included so you can use it for any occasion for anyone.
A card with a cute kitten on the front, and a framed piece of paper for your heartfelt wishes inside!
I did this for my daughter's birthday.
MMU or tool changer is desired - it is possible to sit with the printer and change filaments about 15 times but it would get very difficult to have the correct one on hand without a lot of planning ahead of time.
This technically has 7 colours in it, which I printed using my MMU3 which only supports 5 colours. I used a couple of tricks to accomplish this:
The grey colour is actually 2 layers of black with 1 layer of white on top. Since PETG is more transparent this worked out well.
The pink colour was printed as separate parts out of PLA (!) since I didn't have pink PETG, and I put a pause at the start of layer 4 so I could insert the pink parts into the print and continue the print. First time I have tried this, and it worked perfectly! I was also prepared to glue them in with CA but it wasn't necessary. The smallest of the 3 pink pieces was too small to get into the print during the pause, so I pushed it in after the print was completed.
I chose PETG for the print because I had a transparent red PETG from 3DPrintingCanada which turned out great, especially with the gyroid infill being visible.
Nozzle 0.4mm, layers 0.2mm
I added "mouse ears" for the front and back pieces - trim with a knife.
2 x 20mm M3 Socket Head Bolts used for the hinges. Insert from the centre and use a ball head hex driver.
Filaments:
3DPrintingCanada - Transparent red PETG
3DPrintingCanada - White PETG+
3DPrintingCanada - Black PETG+
Prusament - Chalky Blue PETG
Prusament - Orange PETG
Filaments.ca - Econofil Pink PLA (printed separately)
For the paper insert on the back panel, draw 2 concentric rectangles (in Word or other layout program):
Outside = 201 mm x 122 mm
Inside = 178 mm x 94 mm
After creating your message inside the "Inside" box and printing out the page, cut it around the "Outside" box - the Inside box will show inside the paper frame. Standard photocopier paper fits between the frame and rear piece - the frame just clips on at the top and bottom.
Adding your own text to the front cover
Either:
use Fusion 360 with the Greating_Card_NoTxt.f3d file to add your own text, export only the following bodies/components as a .step file (front cover, your text, white, black, orange, yellow) - ensure the other bodies are hidden when you export.
or, use the Greeting_Card_NoTxt.step file, import it into PrusaSlicer, and add text there.
The fonts I used were:
"Happy Birthday" - Bernard MT Condensed (15 mm height)
"Michelle" - Lucida Calligraphy (20 mm height)
I did this on a Mac - not sure if Windows or Linux will have those fonts.