1 / 1
Ergono3D Tennis Insole – EU Size 42 | TPU 3D Printable Sport Insert — zdjęcie 1

Ergono3D Tennis Insole – EU Size 42 | TPU 3D Printable Sport Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A flexible TPU insole designed for tennis, with arch support and cushioning for lateral court movement made by Ergono3D.

Ocena
0 / 5
Polubienia
3
Pobrania
70
Wydruki
0
Wyświetlenia
213
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This flexible 3D-printable insole is designed for tennis players wearing EU size 42 shoes. Designed by Ergono3D, a browser-based tool for creating adjustable 3D-printable insoles without requiring a foot scanner.

Tennis involves repeated lateral movement, sudden stops, pivots, and rapid changes of direction. This model provides a practical starting point for printing a sport-specific insole with supportive geometry and cushioning.

Features:

• Arch-support geometry

• Cushioned heel area

• Forefoot support for court movement

• Flexible, support-free design

• Designed for TPU printing

• Left and right insole models included

• EU size 42

Recommended material:

TPU 95A is a good starting point. Softer TPU may provide more cushioning but can be more difficult to print.

Suggested print settings:

• Layer height: 0.20 mm

• Nozzle temperature: follow your TPU manufacturer’s recommendation

• Print speed: 20–35 mm/s

• Infill: 15–25% gyroid

• Walls: 2–3

• Print orientation: flat

• Supports: not required

Fit may vary between shoe brands, even when the marked shoe size is the same. Check the model dimensions in your slicer before printing and scale slightly when necessary.

https://ergono3d.com

This downloadable model is intended as a general sport and maker project. It is not a medical diagnosis or a substitute for advice from a qualified healthcare professional.

Tagi