Medieval-themed Indirect LED Lighting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to hide an ugly LAN cable mounted high along my wall so I decided to create a medieval themed LED lighting…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to hide an ugly LAN cable mounted high along my wall so I decided to create a medieval themed LED lighting concept to hide the cable behind.
There are several files here:
"Wall Segment With Texture": 30cm Wall segment, two mounting holes.
"Wall Segment With Texture 20cm": 20cm Wall segment, one mounting hole.
"Tower": banked Tower, used to hide the electric cabling (which in my case was in the middle of the wall)
"reducer Wall"/"reducer Tower": Diameter reducer that allows me to use nails to mount the parts instead of the original designed screws.
The wall-mounting can be done with two screws per Part, which are placed in a way that allows you to place a screw every 15cm and hang each wall segment on any pair of the screws.
A 30cm printing bed is REQUIRED as even diagonally, a module will not fit on a 20x20cm Bed. Printing with Brim will no work since the part is 30cm in width.
Created in FreeCAD and OpenSCAD
Print Settings
Printer:
JGAurora A5
Rafts:
No
Supports:
No
Resolution:
0.3mm (Wall) / 0.1mm (Tower, reducer)
Infill:
10% Bicubic
Filament:
Amazon Basic PLA
White
Category: Sculptures