Nicotine Pouch Can & Belt Clip (Snus/Zyn Container)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print snus/zyn/nicotine pouch container and belt clips
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact 74 x 23 mm snus/ZYN-style container with a main bottom compartment, a top disposal compartment, and a separate disposal lid.
The model is designed to be simple to print, assemble, and use. No supports or brim are required under normal conditions.
A belt clip is available for each variant as an optional addon for those who want that. It securely holds the container, while allowing easy container removal by lifting the top clip away from the container. Also features a small hook to prevent it from accidentally slipping off as easily.
The bottom clip has a fillet that allows the compartment to be opened without having to remove the clip from the container for easier usage.
Included variants
Bottom:
Normal bottom: one open main compartment
Divided bottom: two half-and-half sections separated by an internal divider
Bottom Sizes:
Slim: Half the height of the standard container
Perfect for those with tight pockets or those who want to reduce their usage.Standard: Familiar dimensions of commercial containers
Perfect for you who just want something unique that fits the contents of an entire commercial container.Tall: 50% taller than the standard size
Perfect for those who are afraid of running out while out and about.Jumbo: Twice as tall as the standard size
If you need to bring along two containers worth of snus, especially for a long trip, then this is the variant for you.
Top:
Normal top: closed disposal compartment, like in commercial containers.
Perforated top: small perforations allow limited humidity exchange between the used snus compartment and the main container, which may help re-hydrate particularly dry snus.
Belt clip:
Slim: Fits the Slim size containers
Standard: Fits the Standard size containers
Tall: Fits the Tall size containers
Jumbo: Fits the Jumbo size containers
Lid:
Disposal compartment lid, fits all bottom/top variants.
Which files to print
For one complete container, print:
1x bottom variant
1x top variant
1x disposal lid
1x belt clip variant (optional)
Choose either the normal or divided bottom in your preferred size, and either the normal or perforated top.
Print orientation
Bottom parts: print as oriented
Top parts: print as oriented
Lid: print from the top side (flip the model upside-down)
Belt clips: print on either side
Print settings
Supports: No
Brim: Not required (unless there are bed adhesion issues)
Layer height: 0.15–0.20 mm recommended
Infill: 100% to avoid small gaps behind potential stress points
Material: PLA, PETG, or similar
Belt clips:
4 perimeters
PETG recommended (PLA may lose strength and deform over time)
If you have bed adhesion issues on the top parts, a small outer brim may help.
PETG is recommended for a sturdier container and a more premium feel.
PLA may become too brittle and crack in your backpack/bag/pockets over time
Notes
Perforated vs Solid top
The perforated top is intended for dry snus only. It allows the used snus in the disposal compartment to contribute a small amount of humidity to the inside of the container. Use the normal top if you prefer the fresh and used compartments to remain more isolated.Improving top / lid fit
Sometimes the top part will become slightly too loose/tight, depending on your printer, filament and settings. Try adjusting the scaling of the top part by a few 0.00x%. The tolerances in the model are generous and universal, but slight adjustments may be required to achieve that satisfying snap-fit, especially if printed with PLA.Customization / Personalization
For negative volumes, please only apply these on the bottom of the container, as this is the only section that's thick enough for this.
Updates
3 June 2026
Added optional belt clips for all container sizes. Increased top lid notch thickness. Improved Tall size divider clearance.14 May 2026
Improved top tolerances to prevent it being too lose when printed with certain filaments13 May 2026
Added Slim, Tall and Jumbo size bottom variants of the 70mm container
