AD5X : Filament Spool Rack Infinity Tower 220mm

My version for a filament spool infinity tower with SUNLU 3rd Generation spools in mind, but not restricted to them.

For printing on the Flashforge AD5X / Plate printing size 220mm x 220mm, which includes a top cover and clips ( 2 / Base ) to strengthen the tower ( my attempt to prevent tower leaning ) Also, included is a spacer / base to lift the tower of the ground, should it be needed.

Flashforge AD5X Printing Information :

Base 27mm With Holes For Lugs 03hr 46m Using 92g [ Once For The Bottom ]

Base 90mm 3hr 35m Using 123g [ For Each Reel ]

DEFAULT Support Clips ( Deburr Arches / Circles Where Necessary ) :

1. Arches 21mm 2hr 22m ( 179 Clips ) Using 71g [ Use Glue On Plate ]

2. Circles 35mm 2hr 39m ( 110 Clips ) Using 74g [ Use Glue On Plate ]

Alternative choices, should they be needed :

Lid 18mm 1hr 26m Using 56g

Base 27mm 4hr 38m Using 106g

Various Support Clip Sizes Ranging From 21mm To 43mm [ Use Glue On Plate ]

Spacer 6mm 0hr 30m Using 15g

Spacer 27mm With Lugs 0hr 46m Using 23g

Spacer 50mm With Lugs 01hr 28m Using 49g

SUNLU 3rd Generation spool has been used as the criteria to work with and like the original design, works with sealed and unsealed filaments.

In addition, I modified two of the arches with a cut-out to accept a 42mm Hygrometer Thermometer Round, to obtain ambient temperature / humidity :

https://www.amazon.co.uk/Hygrometer-Thermometer-Temperature-Humidifiers-Dehumidifiers/dp/B09B4X7PKZ

NOTE : The lid ( cover ) can act as a spacer from surface, should the provided new designs for a base and / or spacers aren't to your liking.