RatRig V-Core 3 Foldable Door Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the RatRig V-Core 3 there is an enclosure upgrade. RatRig ships these default with Nylon door handles. Since my…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 488
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
For the RatRig V-Core 3 there is an enclosure upgrade. RatRig ships these default with Nylon door handles. Since my printer is in a very tight corner it was impossible for me to use the supplied door handles since they stuck out too far. Hence I designed these door handles as replacement, they sit near flush with the rest of the printer (it stick out about 1-2mm above the frame screws).
There is an added notch on the handle hinge to limit the folding degree. I added the STEP file so you can change this if you prefer a larger range of movement.
Will add a photo of the printed hinge at a later time.
Print Settings
Printer:
RatRig V-Core 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
65%
Filament:
REAL PETG
Notes:
Print on flat side, no supports required. Use higher infill to ensure the grip is strong enough on heavy doors.
Category: 3D Printer Accessories