1 / 2
M6 tap hole T-nut for 30x30 or 40x40 slotted extusions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part.
- Ocena
- 3 / 5
- Polubienia
- 14
- Pobrania
- 183
- Wydruki
- 1
- Wyświetlenia
- 818
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
I remixed this nut in order to only have a 5.0mm DIA hole which is then tapped to M6 thread to have a 100% plastic part.
If you already have a tap kit available, and don't want any steel in your part, this could be a better option than press-fitting a nut.
Printed in PETG with 4 perimeters and 25% infill worked very well; didn't try with other materials.