Dispenser for tampons (beveled front)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix of Tampon dispenser by Kabauter.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Made a simple remix of this Tampon dispenser by Kabauter.
I rounded off the front, where you take out the tampons, for a cleaner look and better user experience.
The back of it has a slope, that would need support, I didn’t want to bother with that, so I made it go all the way down. Now it dosen’t need supports on the back. It still has the slope on the inside.
I was able to print it without supports on the overhang on the front. You decide whats best for you.
I made a larger version that perfectly fit my shelf. it can store a lot. I have not used it a lot yet, it might be a bit more fiddly to use because of its large storage room.
Fits O.B. Normal. ~5cm
Dimensions:
Original size:
Depth: 105 mm
Width: 60 mm
Height: 120 mm
Stores 15-20 tampons
Large size:
Depth: 160 mm
Width: 60 mm
Height: 160 mm
Stores 100-110 tampons
My print settings:
Layer height: 0.2mm Balanced
Supports: No
Infill: 15%
Material: PLA
Slicer: PrusaSlicer
Brim: No
Printer: Prusa Core One