D&D Sword - Drizzt's Icingdeath
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Standard Digital File License
I am an amateur 3d modeler, so this is my own attempt at Icingdeath based on art by Todd Lockwood.
This model is also made in mind with a 1/4th inch diameter, 640mm long support rod to be ran through. I used aluminum, but you can use anything that fits. The cover image is made using Giantarm Silk Metallic Silver PLA and the default printing settings assume silk pla printed at 230 and 60mm/s outer and 70 mm/s inner walls. I used 4 wall loops with 15% rectilinear infill.
The handle was printed with Elegoo Black PLA and the gem was printed with Elegoo Blue PLA. Didn't print them nearly as slow as the Silver PLA though.
This model was designed entirely by me using Autodesk Fusion. If its a sword, it was most likely made using reference images.