Cushion Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tray that slips between two cushions
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple tray that slips between two cushions to provide a flat surface for various items. My wife and I got a Split-King bed (basically 2 Twin XL beds lashed together) and I designed this to slip between the cushions in the middle for us to set things on while watching TV in bed (usually when sick with a cold or flu).
Overall Dimensions:
Width: 230mm
Height: 172.93mm
Length: 250mm
Table Dimensions:
Width: 230mm
Length: 250mm
Thick: 22.93mm
Fin Dimensions:
Depth: 150mm
Length: 250mm
Thick: 10mm
I printed it on end, which allows for a continuous perimeter all the way around the primary stress areas.
Infill: 5%
Layer: 0.28mm (DRAFT)
Material: PLA
Nozzle: 0.4mm
Printer: Prusa Core ONE+
Supports: Build Plate Only