vent panel slider peugeot expert, citroen jumpy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Vent Control Slider for Peugeot Expert
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Air Vent Control Slider for Peugeot Expert – 3D Printable Replacement Part
A custom-designed replacement slider for the air ventilation control panel in the Peugeot Expert.
This model was created to replace the original part, which often becomes damaged, cracked, or lost over time.
Features
compatible with Peugeot Expert ventilation panel
easy installation without modifications
dimensions based on the original part
optimized for support-free 3D printing
compact and fast to print
Print Settings
Recommended materials:
ASA / PETG -CF/ ABS
Suggested print settings:
layer height: 0.08 mm
infill: 20–40%
print orientation: flat on the build plate
Notes
The model has been tested for fitment, but slight differences may exist between vehicle versions and production years.
For better durability, a small metal pin (Ø4 mm) should be installed at the bottom of the slider.
A fully 3D-printed pin is not strong enough for long-term use and may break during regular operation.
To ensure proper operation and maximum durability, the original rubber cover/sleeve should be removed before installation.
If the part fits well or needs improvement, feel free to leave feedback — I’m happy to refine future versions.
fully functional on ASA
Happy printing 🙂