Single-Axis Bracket for Carvera SMW Fixture Plate (Metric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single-axis bracket for holding stock onto any Saunders Machine Works fixture plate that uses metric.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I had some stock that was too large to hold on my Carvera Air's fixture plate using an L-bracket, so I made this single axis bracket to give me those precious few fractions of an inch back. If you use this, PLEASE let me know - this is so niche of a need I can't imagine anyone else is going to need to mount exactly 8x10 stock.
This is for the SMW Fixture Plate, not the stock Makera plate. Specifically, the Metric version, which uses M6 screws. This is modeled to precisely fit the head of this screw. All SMW metric plates have the same spacing between holes, so this should work for any SMW metric plate, not just the Carvera ones.