1 / 1
Remixed Darkaegis top part with Dividers for curled 110 film Scanning
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had some badly curled 110 negatives to scan, so I added dividers across the top to help flatten the negatives.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Redesigned to add dividers across the top help flatten curled the negatives. May do further edits to add alignment guide and calibration gap at the “top” of the scan bed as my V500 fails if this is aligned at the top without the calibration gap. Still waiting to add magnets, but presses well with the scanner lid alone.
I printed with the "top" on the build plate with normal supports for the division bridges.