NAVEE GT3 ELECTRIC SCOOTER - CUPHOLDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my latest updated version on a workable cup/bottle holder for the Navee GT3 scooter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on my previous bottle holder designed for the Navee GT3 range of electric scooters, I quickly discovered a few limitations. I took the opportunity to create a new and improved version that accommodates bottles with diameters between 50 mm and 80 mm. This design is completely new and thoroughly refined.
You now have two mounting options:
Option 1
Install the Bracket with Hooks in the same location as the OEM hook. As shown in the photos, you may reinstall the OEM hook above it using the screws that secure the handlebar.
Option 2
Install the Bracket without Hooks above the OEM hook, using the existing handlebar screws. Refer to the photos for placement.
No additional hardware is required — the design uses the OEM screws already installed on the scooter.
Important Considerations
Due to the size of the cupholder, the scooter cannot fully collapse for storage. The only workaround is to slide the cupholder off and store it separately (admittedly the one design compromise — apologies!).
If you choose Option 1: The printed hooks will not support the OEM hook’s rated load of 5 kg. Use the printed hooks with caution, as I have not yet performed a stress test to determine their maximum load capacity.
If you choose Option 2: When using the handlebar screws, ensure that you periodically check and tighten them, as they may loosen over time due to vibration.
Printing Guidelines
Recommended materials: PETG or ABS/ASA
Refer to the photos for support placement and print orientation (manual supports recommended).
Print the Bracket with Hooks vertically for optimal strength.
Use 5 walls and 20% infill.
If you would like to tweak or customize the design, feel free to explore the Onshape link.
Have fun printing!