Anschutz 1712 / 1710 bolt protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anschutz 1712 / 1710 bolt protector modelled after the original Anschutz 1913 bolt protector
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Open Community License v1
Anschutz 1712 / 1710 bolt protector tested with the 1712 but since the 1710 is basically the same rifle it will fit too. The shape and dimension is the same as the original 1913 protector sold for years by Anschutz but I designed it from scratch.
No particular material recommended, I printed in PETG, print it standing up with .20 or 0.25 layer height, structural profile, and 0,4 mm nozzle. I always use lots of perimeters for the walls of long objects so there are no rapid movements that can let the print fall but its not needed for strength. Paint support under the notch were the bolt locks. I included a .3mf to show just for illustration to show the correct settings and support but by all means make your own to avoid problems.