Fanvil IP Phone Handset Cradle Clip (X4U, X5U, X6U)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a precision-modeled replacement handset latch for Fanvil IP phones.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ever lost that tiny plastic clip that holds your handset in place, only to find out you have to buy a whole new phone to replace it? This model is a functional 1:1 replacement designed specifically for Fanvil X-Series IP phones.
Overview
This is a precision-modeled replacement handset latch for Fanvil IP phones. It is designed to keep the receiver securely seated in the cradle, especially when the phone is wall-mounted or in high-traffic environments.
Tested and confirmed to fit the following models:
Fanvil X4U
Fanvil X5U
Fanvil X6U
The Story
We created this out of necessity. After a clip went missing, we discovered that replacement parts weren't sold separately—the only "official" solution was to purchase an entirely new phone. Instead of wasting perfectly good hardware, we modeled this replacement to keep our phones functional for pennies.
Print Settings
This model is designed to be a simple, print-in-place solution.
Material: PLA, PETG, or ABS (PETG recommended for extra durability in office environments).
Resolution: 0.2mm.
Infill: 100%.
Supports: No special supports are necessary.
Assembly
Simply slide the printed clip into the existing slot on your Fanvil handset cradle. No glue or screws required!