Leatherman Bit Extender Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clip for the Leatherman bit extender. I got a sheath with elastic on the sides, but I don't trust that my…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a clip for the Leatherman bit extender. I got a sheath with elastic on the sides, but I don't trust that my bit extender wont slide out as the elastic gets worn in.
There are 3 ribs to fit into the 3 grooves on the end of the bit extender. I made it 2 pieces so neither piece is weak along the layer lines. Print in the orientation they are in.
I used hatchbox pla and was able to snap this on through the gap. If you use a more brittle filament, i might suggest sliding it down from the top, as this wont stretch it as much.
I suggest printing with a brim, as neither model has very much bed contact area.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
60
Filament: Hatchbox PLA
Category: Parts