1 / 4
Cooling sleeve caps for QSDY-100-0.37 well pump — zdjęcie 1
1 / 4

Cooling sleeve caps for QSDY-100-0.37 well pump

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The caps securely hold the QSDY-100-0.37 well pump centered inside a 4" I.D. horizontal pipe.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The caps fit over the ends of a 4" I.D. pipe and keep the well pump (in this case a QSDY-100-0.37 well pump) securely centered inside the pipe. This allows the pump to be positioned horizontally (or vertically) inside an open cistern while providing proper water flow over the pump motor housing for cooling. The top cap fits the flanges of the pump to prevent rotation when pump powers on. This model is very specific to the QSDY-100-0.37 pump, but is pretty simple and can be modified via the parameters in the FreeCAD Spreadsheet item.

Notes:
 - the top cap can be split in half when printing to make it easier (possible?) to assemble with the pump in place and to route the power cord.
 - the top cap spacer is optional. It just reduces the top/bottom movement of the pump if the pipe is cut a bit too long.

Tagi