5 Pin security lock key (gps carpuride)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a lock key for 5 pins security screws that you may have.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
EDIT 16-05-26 : i made a long knob version that can reach the handlebar, printed 0.2 30-50% infill made the trick.
I've bought a Carpuride W502 second hand that uses specific lock screws as shown on the pictures. No where given with it.
Print it with 0.1 quality 50% infill honeycomb 3D to ensure the strenght.
My draft where PLA and it was already strong enought to screw everything in place without failure.
Two version avalible, one with a big know, unfortunatly not usable for the handlebar (the ball is in the way).
Second version, smaller that you can hang with keychain.
As usual, i give you everything 3mf of the two version, STL blank or with my name (some auto-promotion is always good xD)
I'm printing a version with ASA to ensure the durability.
If that can help anybody, enjoy!
PS: like, share, collect, help me get some prusameters ;-)
PS2: for the little bast*rds that might use it to steal stuff with this print. You are bad and you'll die alone.