Cute Articulated Flexi Roly Poly Pillbug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cute pill bug / woodlice bug is a joy to play with- rolls up into a ball with antenna and creepy crawly feet.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial
This articulated pill bug is a joy to play with, and he rolls up int a ball when startled.
Model is about 20cm / 8 inches long stretched out, and half that when rolled up into a ball.
Printing
Everything should be in the correct orientation.
Print one head, one tail, and 6 segments.
I used a 0.4mm nozzle and 0.2mm layer heights, and it worked well.
No supports needed
Filament: I've tried PLA and PETG, and both work great. PETG may be a bit stronger for serious play.
Assembly
There is an optional area in the head and tail for a 6x2 or 6x3mm magnet that you can glue in. (I'll try to make it a press-fit someday in the future). This would make the little guy stay shut when it rolls up into a ball.
Start with the tail, and then snap one segment onto it. Be careful not to break the snap catch. Keep doing this until all are assembled!
Enjoy! I'd love to see your builds and know if it works for you!
Changes:
V1.2: 2026/05/27 Made adjustments to be able to print this in PLA- Thicker attachment mechanism so it won't break, and a little extra bed surface to help with adhesion.
V1.0: Initial release: only works in PETG filament.