1 / 3
Mosquito Magnum_BMG-M_Printermods-Gantry_Beacon sensor mount — zdjęcie 1
1 / 3

Mosquito Magnum_BMG-M_Printermods-Gantry_Beacon sensor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy mount for Mosquito Magnum> BMG-M> Printermods v2-Gantry plate> Beacon sensor

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I needed a mount for my custom corexy. This is what i came up with. requires long M3 screws to sandwich the gantry>mount>bmgm>stepper combo. i printed most of it in ht-pla-gf and the duct in resin. requires m3 melt inserts for the duct and beacon parts. I've tested everything, but am not sold on the duct, I'm still tweaking it, but the rest is great. 

Tagi