Maeby's Filament Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Pavel's Filament Stand with sides and/or swatch holders.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked Pavel's Filament Stand, but also wanted to be able to display my swatches alongside each spool as a way to label where each one went, so I remixed it so each piece now has sides and/or a swatch holder.
For my swatches, I used GlennovitS 3D's Favorite Filament Sample at 95% scale. Any swatches should work fine as long as they're less than ~2.5mm thick. If you store multiple swatches next to each other, they may not fit if they're wider than 71mm.
These were no changes to the connectors or scale of the original pieces, so they should all be compatible with the original. If you want the original pieces without the sides/swatch holders, download from the original page.
Print time varies depending on if the piece has sides and/or a swatch holder, but each took 30-60 minutes for me.