1 / 7
Sonoff SNZB-06P Flush Mount for Gira System 55 / Sonoff SNZB-06P Unterputzhalter für Gira System 55 — zdjęcie 1
1 / 7

Sonoff SNZB-06P Flush Mount for Gira System 55 / Sonoff SNZB-06P Unterputzhalter für Gira System 55

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clamping ring system for the Sonoff SNZB-06P designed for installation in the cover plates of flush-mounted boxes.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Flush mount adapter for the Sonoff SNZB-06P presence sensor designed for the Gira System 55 switch system.

The design consists of:

  • a modified Gira System 55 blind cover

  • a slotted sensor sleeve with integrated cable routing

The cable slot allows installation of cables with pre-mounted connectors without cutting or re-crimping.

Supports are required for the cable openings.

The modified blind cover is based on the following model:



Unterputzhalter für den Sonoff SNZB-06P Präsenzsensor passend für das Gira System 55.

Das Projekt besteht aus:

  • einem angepassten Blinddeckel für Gira System 55

  • einer geschlitzten Sensorhülse mit integrierter Kabeldurchführung

Durch den offenen Kabelkanal können auch bereits konfektionierte Kabel mit Stecker montiert werden, ohne den Stecker entfernen zu müssen.

Für die Kabelöffnungen werden Supports benötigt.

Der angepasste Blinddeckel basiert auf folgendem Modell:
https://www.printables.com/model/1007927-gira-system-55-blank-cover

Tagi