Potentiometer Spacer for RP3504
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Acts as a spacer for the RP3504 Potentiometer and similar. 3mf file included so you can adjust the distance to stand off
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Acts as a spacer for the RP3504 Potentiometer and similar. 3mf file included so you can adjust the distance to stand off.
I made this because the shaft stuck out too far from the wall of the box I was mounting it on for my dial to sit nicely.
Used the nut and washer provided with the potentiometer to fasten it to this stand off, then glued the stand off model to the surface I was mounting the potentiometer to.
The slit out of the edge of the model accomodate the small piece of metal that sticks up from the face of the potentiometer so the spacer can sit flush.
Photo is of a previous version prior to adding the cut out but it's still the same and I no longer have the device I used the new model in.