Ryobi PCLLB01 18V Leaf Blower Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ryobi has quite a few different leaf blowers and they all have a different mounting face. This is for the PCLLB01.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are several Ryobi leafblower wall mounts out there, but none of them seemed to fit my specific model. Before printing, verify that this will fit your model, I've included pictures of my leafblower for comparison.
I printed this in Creality CR-PETG with a .6mm nozzle with two wall loops 8% infill and it seems strong enough for my purposes, but you could always get more strength by adding wall loops if you feel that is necessary.
With my settings, printed with a .6mm nozzle, this used 72 grams of PETG and took about an hour and a half to print on my Sparkx i7.