Wall mount for Lego MOC-82416 Lamborghini Countach - 10295 Porsche
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount holder for MOC Lamborghini Countach
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall Mount for LEGO MOC-82416 Lamborghini Countach 10295
A simple wall mount holder for the LEGO MOC-82416 Lamborghini Countach, built from the LEGO Porsche 10295 set.
I wanted a clean way to display this Countach MOC on the wall, so I designed this basic but strong holder. The two hooks slide into the gaps in the chassis area marked in the photos, keeping the model securely in place while displaying it vertically.
I printed the mount in PLA with 4 walls. For extra strength around the fork/hook area, I also added two small cube parts underneath the forks and printed those with 10 wall loops to create a stronger bond. You can see the placement in the slicer screenshots.
Print settings
Material: PLA
Walls: 4
Infill: 10%
Extra reinforcement cubes: 10 wall loops
Supports: yes
Orientation: Flat on the bed, as shown in the slicer screenshots
Notes
Make sure the hooks fit correctly into the marked gaps before hanging the model on the wall. The model should sit securely, but always test the fit carefully before leaving it mounted.