3D stand for AXM Space Shuttle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand compatible with the AXM Space Shuttle orbiter with open payload. It is based on the actual stand for…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand compatible with the AXM Space Shuttle orbiter with open payload. It is based on the actual stand for the Atlantis attraction at Kennedy Space Center, with the same degree inclination of 43.21 degree.
It's a simple design of only two pieces. Now you can display your AXM Shuttles. Enjoy!
Update as of May 8, 2022: Version 2
Both supports now are beveled and a third component has been added, although it's optional. The bottom section is glued to both vertical supports, making it easier to put the Shuttle model on top of the stand.
Final update as of May 17, 2022: Version 3
Use of magnets instead of gluing all the components. Magnets need to be 2 mm in diameter and 1 mm in depth.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
5
Filament: PLA Grey or Black
Notes:
If you have adhesion problems with your 3D printer, then it's advisable to use a brim. No need for a raft.
Category: Vehicles