Custom Lid Riser for RepRap Fisher Delta 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom blocks that make it easier to remove and replace the lid without it needing to be permanently bolted in place.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The upgraded geared extruder required the filament to be loaded through the top of the machine. This meant the top panel couldn't be permanently fixed as intended in the original design. I got fed up with it being loose so I created some blocks that interfaced with the original idler brackets. Existing holes in the acrylic lid were used to secure the blocks to the lid. The lid can now be removed and replaced as required.
I recommend buying a set of M2, M3, M4 bolts, nuts and washers in a variety of lengths. They are really useful for these sort of projects and it saves trying to buy small quantities one project after another.
Featured in my blog post about my Fisher printer:
https://www.tech-spy.co.uk/2026/03/reprappro-fisher-delta-3d-printer/