Aruba 535 Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pole-Mount for Aruba 535 or similar WiFi access point, using zip-ties
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Want to mount your Aruba AP onto a Pole or other round surface?
Grab some zip-ties, print this part, screw it on and go!
Usage
It screws onto the back of the AP with the original screws (M4 I think?)
loop two zip-ties of sufficient length through the holes and fasten it to a pole.
Measurements
Zip-Ties: max 10mm wide, 3mm thick, (so should fit all possible zipties)
Pole: designed for 50mm diameter (or smaller) poles.
Different Diameters
I will upload different versions for different pole diameters on request
You may also download the FreeCAD file and adjust the diameter yourself BUT please leave a comment and tell me what diameters are useful so I can upload additional versions.
Printing
infill: 18% Honeycomb
wallstrength: increase number of perimeters for strength
support: no
brim: no
License
Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0
Share with others
Don't keep your modifications to yourself
Always attribute the source!