1 / 3
Mini Entropy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
Miniature version of my 1 lb antweight combat robot Entropy
Assembly:
You will need 1x frame, 4x wheels, 1x rod, 1x blade, and a hot glue gun.
Start with the weapon assembly. Slide the rod partially through the hole in the uprights. Place the weapon onto the rod, then push the rod the rest of the way through until it is flush with both uprights. Secure it by applying hot glue to the outside of the uprights around the rod so it locks in place.
For the wheels, apply a small amount of hot glue into each wheel slot. Insert each wheel firmly until all four are fully seated and aligned.