Weapon Bay for ac6 30mm model kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3d print piece weapon bay for 30 minute mission armored core 6 model kit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
3d printed weapon bay for 30 minute mission armored core 6 model kit, my friend was asking for it so here it is. My version is far more simple than what the original weapon bay in game or you get as model kit. But it work you can mount your arm weapon replacing back weapon. Anyway my design also still use the default back weapon mount of your 30 minute mission armored core 6 model kit shown in the photo.
I print using normal 0.4 mm nozzle on fdm printer. The piece in the photo i print using pteg but pla should work fine. You will need to print these piece using support, I suggest you print oriented as I shown here.
The purpose of printing it like this is so the peg is merged with the whole piece layer wise. Make it stronger so less likely to break or split. That being said the peg may get thicker because of the leftover support so you probably need to sand the flat side a bit. So if you follow my suggestion, bring your sanding file.
The left image more easy to break rather than image on the right