1 / 4
Hanna Checker Cuvette Adapter for Taylor SpeedStir — zdjęcie 1
1 / 4

Hanna Checker Cuvette Adapter for Taylor SpeedStir

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Centers Hanna Checker cuvettes on the Taylor SpeedStir magnetic stirrer.

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
679
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Most Hanna Checkers that I have used require a "shake for 2 minutes" step. The Taylor SpeedStir can be used with the correct size stir bar, but if the cuvette is not perfectly centered, the stir bar will just get stuck on one side and not spin. I put together 2 quick designs to address this "problem". One is a "quick print" centering shim and the other is a more robust guide that should prevent me from accidentally knocking over the cuvette while stirring. Now I can multi-task instead of shaking for 2 minutes per test.

Note: The STLs are modeled and oriented to print without supports. 

Tagi