3D Scan of a Bronze Marine Propeller with the Revopoint POP4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Scan of a Bronze Marine Propeller with the Revopoint POP4
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
⚓ 3D Scan of a Bronze Marine Propeller with the Revopoint POP4
I was asked to perform a 3D scan of this old 4-blade bronze marine propeller, with the possibility of it being reproduced later. The goal was to capture its overall geometry as accurately as possible, including the details of the central hub with its keyed bore (keyway slot).
🔍 Scanning method used:
• Marker tracking mode
• 1 cross-line scan on each side to capture the overall geometry of the propeller
• 1 additional single-line scan on each side to improve the capture of more complex areas, especially the central bore
• Merging of the different scans directly in Revo Scan 6.2
🖥 Post-processing performed entirely in Revo Scan:
✔ Scan merging
✔ Isolation of useful data
✔ Light smoothing
✔ Hole filling where needed
✔ Mesh simplification (mesh reduced by 77%) to significantly reduce file size while keeping the main details intact
Despite the patina, bronze corrosion, and complex blade geometry, the POP4 was able to produce a detailed 3D model of the propeller, ready for the next steps ⚓
The file is also available, mainly to showcase the result achievable with a Revopoint POP4 scan on an old metallic object with complex shapes.