Extendable Travel Yarn Holder with rotating plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep knitting on your travels or at home. Extendable spool, screw in place to assemble dissasemble
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The pleasure of reinventing the wheel....
Push your spool or bull or thread onto the pin and it will merrily roll along as you're using it. You can disassemble and it will snap in place for travel.
You need a 608 bearing.
There is is all printed. Including the modelled screw to assemble.
The tolerance for the screws is 0.2mm
Hidden micro slots to force multiple walls around the pins for strenght
the extension hides inside the stick and can be screwed for higher stick.
After many tests, the best way to print the plate to have a very strong pin in the middle, so it never snaps, is to print at 45 degrees. So I made a model which I suggest by default to print that has integrated support that you can just remove after.
Default: Print those files
base.stl (that's the 45o angled one with integrated support
spin plate.stl
sitck
extension
Printing tips
0.2mm layer height
pla is fine
I like 6 walls 15% infill but you can go 4 walls 20% infill and it's fine I think
You can print the "base (plain).stl" if you want but because of layer direction, the pin in the middle is fragile and when pushing to secure the bearing it snapped a couple of times. Printing at 45o angle solves this.
The bearing are held by pressure. The pin one is a bit hard - I gently hit it with a hammer - the 45o angled version can handle this wihtout issue)
Sharing my (messy) fusion 360 file for anyone to play with.